Sam4s ER-5215M - RS-232 Communication Option Programs; RS-232 Option Chart

ER-5215M Electronic Cash Register v2.23 S-Mode Programming • 85
RS-232 Communication Option Programs
You must define the device(s) attached to the RS-232C communications ports, and the options for the
device(s).
1. Turn the control lock to the S position.
2. Enter 8 0 (enter 8 1 to program the second port) and press the SBTL key.
3. Refer to the chart RS-232C option chart that follows and enter the number of the option
(N1) you wish to program and press the X/TIME key.
4. Enter the value (N2) that represents your selection and press the CASH key.
5. Repeat from step 2 for any additional options you wish to program.
6. Press CASH to exit the program.
RS-232 Option Chart
Address Option Value Se lection
0
9600 BPS
1
1200 BPS
2
2400 BPS
3
4800 BPS
1
Baud Rate
4
19200 BPS
0
NONE
1
ODD
2
Parity
2
EVEN
0
8 BITS
3
Data Bits
1
7 BITS
0
1 BIT
4
Stop Bits
1
2 BIT
Repeat for another
Index
XTIME OPTIONSBTL 0 8 CASH VALUE CASH
XTIME OPTIONSBTL 1 8 CASH VALUE CASH
Port 1
(standard)
Port 2
(standard)