ER-5215M Electronic Cash Register v2.23 P-Mode Programming • 147
Program 801 - Drawer Assignment
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 1, press the SBTL key.
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
4. Enter a drawer assignment (0 (no drawer), 1 (default), or 2); press the SBTL key.
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
Program 810 - Clerk Descriptor Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
4. Enter up to 18 three-character codes and press the X/TIME key. (See “Descriptor Code
Chart” on page 104.)
5. Press the CASH key to finalize the program.
8 0 1 SBTL
X/TIME
SBTL
Enter 0, 1 or 2
CASH
8 1 0 SBTL
X/TIME
CASH
SBTL
Enter up to 18 three-
character codes
To Next Page
Loading...
