ER-5215M Electronic Cash Register v2.23 P-Mode Programming • 149
Programming Group Descriptors
1. Turn the control lock to the P position.
2. To begin the program, enter 9 1 0, press the SBTL key.
3. Enter the number (1-99) of the group you wish to program; press the X/TIME key.
4. Enter up to 18 three-character codes and press the X/TIME key. (See “Descriptor Code
Chart” on page 104.)
5. To program additional groups, repeat from step 3, or press the CASH key to finalize the
program.
9 1 0 SBTL
X/TIME
CASH
SBTL
Enter up to 18 three-
character codes
To Next Page
Loading...
