What to do if Samlexpower Remote Control displays 'SD card write error!'?
- DDonald OliverSep 12, 2025
Remove and re-insert the card.
What to do if Samlexpower Remote Control displays 'SD card write error!'?
Remove and re-insert the card.
What to do if Samlexpower Remote Control says 'SD card full!'?
Move or delete files, or re-format the card.
How to resolve 'OUT OF RANGE!' error on Samlexpower Remote Control?
Change the parameter value to be within the specified range.
Manual contains critical safety instructions for installation and maintenance.
Discusses how inverter estimates discharge and triggers low voltage alarms.
Provides formulas and rules for determining the correct inverter battery bank size.
Emphasizes adherence to safety instructions before starting installation.
Details requirements for safe and proper mounting of the inverter/charger.
Explains how to connect batteries in series and parallel for desired voltage/capacity.
Details the connections required for the DC side of the unit.
Provides guidance on selecting appropriate wiring and breakers for AC input.
Provides guidance on selecting appropriate wiring and breakers for AC output.
Details the heavy-duty, continuous rated inverter generating pure sine wave output.
Explains the operation and features of the internal battery charger.
Covers specific charging considerations and BMS integration for lithium-ion batteries.
Details the procedure for powering the unit ON and OFF using the front panel button.
Details unit protections, fault messages, and troubleshooting guidance.
Explains how to power off the unit when it is in a fault condition.
Outlines cooling methods, built-in protections, and alarm indicators.
| Output Waveform | Pure Sine Wave |
|---|---|
| Efficiency | Up to 90% |
| THD | < 3% |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Input Voltage | 12V, 24V, or 48V DC |
| Output Voltage | 120V AC |
| Continuous Power | 3000W (depending on model) |
| Surge Power | 2x Continuous Power |
| Operating Temperature | -20°C |
| Remote Control | Optional |
| Protections | Overload, Over Temperature, Short Circuit |
| Model | EVO-1212, EVO-1224 |
| Output Frequency | 60Hz or 50Hz |