100
Note:
Upon your first launch of the Alarm Clock application,
three alarm presets are set up by default and ready for
you to customize. These alarms are turned off by default.
2. Tap the time field of a default alarm event.
Note:
A new alarm can also be created from the Alarm page by
pressing
➔
Add alarm
.
•
Activate the alarm by tapping its adjacent field and
placing a checkmark next to the select alarm event.
3. Tap the
Time
field to begin adjustment of the
alarm time.
•
Adjust the hour and minute by tapping either or
.
•
Tap the
am
or
pm
button to change the value.
•
Tap
Set
when finished.
Note:
The number of hours and minutes left before the alarm
goes off is briefly displayed onscreen after you set the
new alarm time.
4. Tap
Ringtone
to select an audio ringtone that
will sound with the alarm.
•
Tap a ringtone to hear an audio sample.
•
Tap
OK
to accept the ringtone assignment.
5. Tap
Vibrate
to add a vibration feature to the
alarm.
6. Tap the
Repeat
field to select a repeating status
for the alarm.
•
Place a checkmark adjacent to the desired repetition
days
Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday
or
Sunday
and tap
OK
.
7. Select a unique name for this alarm event by
tapping the
Label
field, entering a new label,
and tapping
OK
.
8. Tap
Done
to store the new alarm event.
Note:
To allow the alarm to sound even while the device is in
silent mode, press and tap Settings, then activate
the Alarm in silent mode field.
To delete an Alarm event:
1. Press and tap
➔
.
2. Touch and hold a desired alarm event.
3. From the onscreen context menu, tap
Delete
alarm
.
To disable an Alarm event:
1. Press and tap
➔
.
2. Touch and hold a desired alarm event.
3. From the onscreen context menu, tap
Disable
alarm
.
To customize the onscreen clock:
1. Press and tap
➔
.
2. Tap the onscreen alarm clock.
3. Scroll your finger across the bottom field to
temporarily view each selection.
To Next Page
Loading...
