34
Section 5: Call Functions
This section describes features and functionality
associated with making or answering calls, and the
Contacts list, which is used to store contact
information.
Displaying Your Phone Number
䊳
Press
➔
and tap
➔
About phone
➔
Status
. (Your phone number and other information
about your device and account is displayed.)
Making and Answering Calls
Making Calls
1. Press and then tap .
– or –
Press and touch .
2. Enter a phone number using the onscreen
dialpad and tap .
•
If you make a mistake while dialing, touch to
erase the numbers.)
3. Press or tap when finished.
Tip:
To redial your last outgoing call, press twice.To redial
other recent numbers, press , tap a number from the
Call Log list, and press
Call
or . When making calls off
the Nationwide Virgin Mobile Network, always dial using 11
digits (1 + area code + phone number).
Dialing Options
When you enter numbers within the Keypad, you will
see three onscreen options.
From the Keypad screen, you have the following
options:
•
Call
( ) to call the entered number.
•
Delete
( ) to delete digits from the current number.
•
Send message
( ) to send the current caller a text
message while still maintaining the current call active.
To initiate additional options, tap and the
onscreen button.
•
Add to Contacts
to add the current number to either a
new or existing Contacts entry.
•
Speed dial setting
to access the Speed Dialing menu
where you can assign a speed dial location to a current
Contacts entry. See “Speed Dialing” on page 39.
•
Add 2-sec pause:
to insert a two second pause to enter a
2 second delay within a number string (the phone
continues dialing after 2 seconds without any additional
keys being pressed).
•
Add wait
to insert a hard pause within the number string
(the phone waits for your input). A wait requires that any
consecutive numbers be manually sent by touching
Yes
.
To Next Page
Loading...
