• Changingthe recording mode : Ifthe [FULL] menuwas selected
Steps from 1-4are the same as those for selectingthe [MODE] menu.
5.The recording modeof stiltimage selected in the [MODE SET] menuwill
display.
6. Pressthe M (Mode[ button located on the back ofthe cameraand the mode
selection menu wil_display.
7.To select the Auto Program, Movieclip or Scenemodes, press the Left/
Rightbutton.
To move between the Auto, Manual,Movie clipmenu lineand Scene menu
line,pressthe Up/ Down button.
[Mode selection menu]
{Select}rigthe Movieclipmode]
[Selecting the Scene mode]
• Howto use the Auto mode( _ )
Use this forshooting basic stillimages.
1.Select the [FULL] sub menuon the [MODE]
menu (p.t4).
2.Select the Auto mode by pressingthe M (Mode[
button (p.15).
3. Pointthe cameratowards the subjectand
compose the image by usingthe LCD monitor.
4. Pressthe shutter buttonto capture an image.
[Pressing tt_eLeft button]
[Pressing the Up button[
8. Pressthe M (Mode)button to selectthe mode andthe mode selection menu
will disappear.
[AUTO mode]
(15}
To Next Page
Loading...
