• If you select [Computer] sub menu in the [USB]
setup menu, [Connecting Computer]message wilI
display when you connectthe camerato your
printerand theconnection wiltnot be established.
Inthis case, press the Printer button.[Connecting
Printer] messagewill display andthe Easy printing
mode willbe selected.
* Insome instancesthe camera may notconnect tothe printer,this will dependon
the manufacturer ofthe printer.
• Easy printing
When you connectthe camerato printerin the Play
back mode, you can print a pictureeasily.
- Pressingthe Printer (_ ) button :
The currentlydisplayedimage will be printedwith
the printer'sdefault setting.
- Pressingthe Left/ Rightbutton :
Selects a previous/ next image.
• Select picturesto print
1.Press the Menubutton.
2. The [Images[menu willappear.
3. Usethe UP andDOWNbuttonsto selectthe desired
submenuvalue,andthenpress the OKbutton.
When [One Pic]isselected :
The PictBridge functionwill be appliedonly tothe
picture currentlydisplayed.
When jAilPics] isselected :
The PictBridge functionwilt be appliedto allpictures, excluding movieclips
and voicefiles.
_5o_
• Setting the Number ofCopies to Print
-Select [One Pic]or jAil Pics]. A screen where you can set the numberof copies
toprint will appear as shown below.
[When [One Pic] is selected] [When [AllPies] is selected]
-Press the Up / Down button toselect the number ofprints.
-When [One Pic]is selected : Use the Left/ Right button toselect another
picture.After selecting another picture, selectthe
numberof prints foranother picture.
-After setting the numberof prints, pressthe OK buttonto save.
-Press the Shutterbutton to returnto the menuwithout settingthe number
ofprints.
• AUTO SET
1.Use the LEFT and RIGHT buttons toselect the
[AUTO SET] menutab.
2.Use the UP and DOWNbuttons to selectthe
desired submenu value,and then press the OK
button.
[No] :[CUSTOM SETJvalues are kept.
[Yes] :Atlvalues in the [CUSTOM SET] are
automaticallychanged.
To Next Page
Loading...
