• In any modewith the exception ofVOICE
RECORDING mode, you can check the recording
statusin the LCD monitor.
• Idle mode : If you select the [LCD Save] andthe
cameraisn't operated during the specified
time(about30 SEC.),the camera power
will be idle (LCDmonitor :OFF, Camerastatus lamp :Blinking)
automaficatly.
- To usethe camera again,press any ofthe camera buttonsexcept the power
button.
- Ifthere isno operation duringthe specified time,the camera power willbe
turnedoff automaticallyto save batterylife. Refer topage 54 for more
informationabout the auto poweroff function.
• Turn the cameraon and select Play mode by pressingthe play modebutton
( r_l ). Tile camera can now playback the images stored in the memory.
• tf the memory card is insertedin the camera, allthe camera functionsapply only
tothe memory card.
• tf the memory card is not insertedin the camera, allthe camera functionsapply
onlyto the internal memory.
• Playingback a still image
1.Setectthe PLAY modeby pressing the
playmode button ( r_l ).
2.The lastimage stored on the memory is
displayedon the LCDmonitor.
3. Select an image thatyou want to viewby
pressing the LEFT / RIGHT button.
÷ Press and hold the LEFT or RIGHT
button to playback the images quickly.
{36}