•Windows98/ 98SE
1.Checkwhether the cameraand PC are transferringa file.
Ifthe camera statuslampblinks, please wait until the lamp has finished
blinkingand isconstantly on.
2. Unplugthe USB cable.
• Windows 2000 / ME/ XP
(Tile illustrationsmaydiffer fromthose showndepending on the Windows O/S.)
1.Checkwhether the camera and PC are transferringa file.
Ifthe camera statuslampblinks, please wait untiIthe lamp has finished
blinkingand isconstantly on.
2. Double-clickthe [Unplug or Eject Hardware] icon 3_
on the taskbar.
[Doub]e-click!]
3. The ]Unplug or EjectHardware] window will
open.Select the [USB Mass StorageDevice]
andclick the ]Stop] button.
4. The [Stopa Hardwaredevice] windowwill open.
Select the [USBMass Storage Device]andclick
the [OK]button.
6.A[Unplug or EjectHardware] window will open.
Clickthe [Close] button andthe removable disk
willbe removed safely.
7.Unplugthe USBcable.
1.A USB Driverfor MAC is not includedwith the software CD as MAC OS
supportsthe cameradriver.
2. Checkthe MAC OS versionduring start-up.
This camerais compatiblewith MAC OS 10.0_ 10.3.
3. Connect thecamera tothe Macintosh andturn the camerapower on.
4. Anew iconwill be displayed on the desktopafter connecting the camera to
the MAC.
1.Doubleclick a new icon on the desktop and the folder in the memory wilt be
displayed.
2. Select an image file andcopy or move itto MAC.
5. A[Safe toRemove Hardware] windowwill
open.Clickthe [OK] button.
{68_
To Next Page
Loading...
