Samsung L700 - PictBridge Connectivity; Printer Connection Setup

•Youcanspecifytheprintsizewhenprintingimagesstoredonthememorycard.
The[Size]menuisavailabIeonlyforDPOF1.1compatibleprinters.
• SettingthePrintSize
1.Selectthe[Size]menubypressingtheUP/ DOWN
button and press the RIGHT button.
2. Selecta desired sub menuby pressing the
UP/ DOWNbutton and press the OK button.
[Select]: Selection window foran image tobe
changed printedsize is displayed.
- Up/ Down / Left/ Right: Select an image.
-Zoom W / T Button : Changethe printsize.
- OK button : Your changes will be saved andthe
menuwill disappear.
[All Pics]: Change print sizeof allsaved images.
-W / T button :Select a print size
- OK button : Confirmthe changed setting.
[Cancel] :Cancel all ofthe print size settings.
÷ DPOF [Size]secondary menu : Cancel, 3X5,4X6,
5X7, 8Xl 0
÷ Depending on the manufacturer andprinter model,
cancellingthe printing may takea littlelonger for
the printerto process.
• You can use the USB cable toconnectthis camera toa printerthat supports
PictBridge(soldseparately) and printthe stored imagesdirectly.
Movieclips andvoice flies cannot be printed.
• Setting up the cameraforconnection with the printer
1. Inany mode withthe exceptionof Voice Recording
mode, pressthe MENU button.
2. Pressthe LEFT / RIGHT button andselect
[SETUP] menu tab.
3.Select [USB] menuby pressing the UP / DOWN
button and press the RIGHT button.
4.Select [Printer]menu by pressing the UP/ DOWN
button andpress the OK button.
÷ Ifyou selected[COMPUTER] in Step5, when you connectthe camera to your
printer,the [USB ERROR!]message will displayand the connectionwill not be
established,tnthis case,disconnect the USB cable, andthen followthe
procedurefrom Step2 onwards.
(49}