•Whitebalance:Thewhitebalancecontrolallowsyoutoadjustthecoloursto
appearmorenatural.
•SelectingaWhiteBalance
1.Pressthe+/ -button, andthen use the UP
and DOWNbuttons toselect the white
balanceicon ( AWB). The white balance
menu barwill appear as shown.
2. Use the LEFT and RIGHT buttons toset the
whitebalanceto the desired value.The value
you setwil be displayedon the LCDmonitor.
AUTO AWB :The camera automaticallyselects the appropriate
white balancesettings, dependingon the prevailing
fightingconditions.
DAYLIGHT ;_,,-'- : For taking imagesoutside.
CLOUDY Ih, : Fortaking imagesunder a cloudy andovercast sky.
FluorescentH _ :Forshootingunderdayfightfluorescenttypesofthree-
way fluorescentlighting.
FluorescentL _ : Shooting underwhite fluorescentlighting.
TUNGSTEN @ : Forshootingundertungsten(standardfightbulb)lighting
CUSTOM _m. : Allowsthe user to setthe white balance according to
the shooting condition.
Differentlightingconditionsmay cause a colourcast on your images.
3. Pressthe + / - button again. Thevalue you set willbe saved and White
Balance setup modewifi end.
• Usingthe Custom White Balance
White balance settings mayvary slightlydepending on the shooting
environment.
You can select the mostappropriate whitebalancesetting for a givenshooting
environment by setting upthe customwhite balance.
1.Select the CUSTOM ( _._ ) menu of the
White Balance.
2.Placea sheet of whitepaper in front of the
cameraso thatthe LCDmonitor shows only
white, andthen press the SHU]q-ER button.
3. Your custom whitebalance valueis stored.
-The custom whitebalancevalue will be
applied,starting with the nextpictureyou
take.
-The user configuredwhitebalance willbe
remain effectiveuntilit isoverwritten.
T
[Whitepaper]
(30}
To Next Page
Loading...
