EasyManua.ls Logo

Samsung L700 - Troubleshooting Common Issues; Camera Power and Image Issues; Service Center Contact Guide

Samsung L700
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pleasecheckthefolbwing
The cameradoesn't switch on
There is lowbattery capacity
Insertfresh batteries.(p.f O)
The battery maybe insertedincorrectly.
Insertthe batteryaccordingto the polaritymarks (+ -)
The battery isnot inserted
Insertthe batteryandturn on the camera
The camerapower ceaseswhile in use
The batteryare exhausted
Insertcharged battery
The Camera isturned off automatically
Tum on the camera power again.
Batterypower quicklydrains
The Camera is being usedin lowtemperatures
Keepthe camerain warm conditionsO.e.inside a coator jacket) and only
remove itin order totake images
Camera doesnot take imageswhen pressing the Shutter button
There is insufficientmemory capacity
Deleteunnecessary imagefiles
The memory card has notbeen formatted
Formatthe memory card (p.54)
The memory card is exhausted
Inserta newmemory card
The memory card is locked
Refer to[Card Locked!] error message
The camera's poweris off
Turn the camera poweron
(60_
Thebattery is exhausted
Insertfresh batteries.
Batteryis insettedincorrectlywith the polaritiesreversed
Insertthe battery accordingtothe polarity marks (+ -)
The camera suddenlystops working while in use
The camera stopped dueto a malfunction
Remove/re-insert batteryand switch the camera on
The images are unclear
Apicturewas taken withoutsetting an appropriate macro mode
Select an appropriate macro mode totake a clearimage.
The picturewas taken with the subjectbeyond the flash range
Take a picturewithin theflash range
The lensis smudged or dirty
Clean the lens
The flash does notfire
Flashoff mode hasbeen selected
Dis-engage flash off mode
The camera modecan't use theflash
Refer to the FLASH instruction(p.22~24)
Incorrectdate and time isdisplayed
Thedate andtime have beenset incorrectlyor thecamera has adopted the
defaultsettings
Reset the date andtime correctly
The camera buttons do not operate
Camera malfunction
Remove / re-insertbattery andswitch the camera on
Acard error has occurred while the memory card is in the camera.
Incorrectmemory card format
Re-format the memory card

Table of Contents

Related product manuals