OfficeServ 7400 INSTALLATION
TECHNICAL MANUAL PART 1 JANUARY 2011
7 CONNECTING STATIONS AND ADDITIONAL EQUIPMENT
7.1 CONNECTING STATIONS .................................................................................... 7.1
7.2 CONNECTING ADDITIONAL EQUIPMENT ................................................... 7.32
8 POWER UP PROCEDURES
8.1 PRE-CHECK .............................................................................................................. 8.1
8.2 STARTING THE SYSTEM ....................................................................................... 8.1
8.3 CHECKING THE FAN ............................................................................................. 8.2
8.4 NUMBERING EXTENSIONS AND C.O. LINES .................................................. 8.3
9 SOFTWARE AND DATABASE MANAGEMENT.
9.1 SOFTWARE MANAGEMENT ............................................................................... 9.1
9.2 DATABASE MANAGEMENT ................................................................................ 9.1
10 ADDING BOARDS TO THE SYSTEM
10.1 ADDING STATION AND TRUNKS ....................................................................... 10.1
FIGURES
Figure 2.1 Tools Required for Rack Installation
Figure 2.2 Rack Installation (1)
Figure 2.3 Rack Installation (2)
Figure 2.4 Rack Installation (3)
Figure 2.5 Rack Installation (4)
Figure 2.6 Grounding
Figure 3.1 Front Panel Configuration
Figure 3.2 Possible Combination of OS7200 and OS7400
Figure 3.3 Back Panel Components
Figure 3.4 Switch Settings
Figure 3.5 Installing the Processor Board (1)
Figure 3.6 Installing the Processor Board (2)
Figure 3.7 LP40 Link Cable
Figure 3.8 Connecting MP40 Board to LP40 Board
Figure 3.9 Connecting MP40 to OS7200 LCP
Figure 3.10 Front View of the MP40
Figure 3.11 Front View of the LP40
Figure 3.12 Installing Optional Daughtercards on the LP40
Figure 3.13 Installing Optional Modem Daughtercards on the MP40
To Next Page
Loading...
