OfficeServ 7400 INSTALLATION
TECHNICAL MANUAL PART 5 MAY 2010
5.5
OFFICESERV 7150 FRONT VIEW
Front view of the OfficeServ 7150 cabinet is as shown in the following illustration. The cabinet
consists of two slots and one distributor. A PoE-M PSU module is inserted to each slot.
Each PoE-M module contains an AC power switch and a module LED. The distributor consists
of an external battery power switch and a modular alarm jack.
Figure 5.3 Front View of Cabinet
OFFICESERV 7150 REAR VIEW
Rear view of the cabinet contains an external battery connection port, a power connector, a
DC output connection port and a grounding port.
Figure 5.4 Rear View of Cabinet
PARTS
The OfficeServ 7150 cabinet comes with the following parts:
PoE cable 1 ea
Battery cable 1 ea
AC power cable (110V Type) 1 ea
Alarm cable 1 ea
19" rack mount kit 1 set
The PoE-M PSU modules are sold separately. Extra PoE cables can be purchased if needed.
Battery Switch
AC Power Switch
PoE-M PSU
Module
Power
Connection to
the 7400
cabinets
External Battery
Connection
AC Power
Connection
Alarm Jack (Connects to “PSC”
Port on LP40).