Preparing
[ENGLISH_
There are two types of power source that can be connected to your camcorder.
The AC PowerAdapter and AC cord : used for indoor recording.
The Battery Pack : used for outdoor recording,
To use the AC Power Adapter and DC Cable
1. Connect the AC Power Adapter to the AC cord.
2. Connect the AC cord to a wall socket.
The plug and wall socket type may be different depending on
the country you're in.
3. Connect the DC cane to the DCjack socket on the camcorder.
4. Set the camcorder to the CAMERA or PLAYER mode by holding down
the tab on the power switch and turning it to the CAMERA or PLAYER position.
1
,,&
To Next Page
Loading...
