SANY SY16C - Left Turn; Spot Turning; To the Left; To the Right

SY16C Excavator OMM Machine Operation
SANY Operation and Maintenance Manual — 0420 4-25
TABLE OF
CONTENTS
INTRODUCTIONSAFETY
MACHINE
CONTROLS
MACHINE
OPERATION
MAINTENANCESPECIFICATIONS
OPTIONAL
EQUIPMENT
Left Turn
Fig. 4-24
0002837
1
Push the right travel control lever (1) forward or press the
top of the right pedal and leave the left travel control lever
in the neutral position to turn the machine to the left.
Spot Turning
Fig. 4-25
0002838
1
2
4
3
To the Left
Simultaneously push the right travel control lever (1) or
press the top of the right foot pedal (2) and pull the left
travel control lever (4) or press the bottom of the left foot
pedal (3) to rotate the machine to the left.
To the Right
Simultaneously push the left travel control lever (4) or
press the top of the left foot pedal (3) and pull the right
travel control lever (1) or press the bottom of the right foot
pedal (2) to rotate the machine to the right.
Stopping the Machine
The joysticks will return to the neutral position when
released, and the work equipment will hold its position.
Slowly move the travel control levers/pedals to the neutral
(N) position. The travel brake will stop and hold the
machine automatically.
NOTICE!
Do not stop the machine suddenly, except in an
emergency. Failure to follow this notice could
result in damage to the machine.
Fig. 4-26
0002839
N