Sanyo PLC-HP7000L Specifications

PLC-HP7000L Basic Serial Command Functional Specifications
12/27
6.5 POWER ON Command
Command “C00” [CR]
Detail
Power ON
When already Power is ON, no operation is started. When sending this
command during Countdown in process, Countdown is terminated.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.6 POWER OFF Command (Quick POWER OFF)
Command “C01” [CR]
Detail
Power OFF (Standby)
This command executes Quick Power OFF operation without displaying “Power
OFF?” message, which is displayed when Power is turned OFF with
ON/STAND-BY button of the projector or remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.7 POWER OFF Command
Command “C02” [CR]
Detail
Power OFF (Standby)
This command works the same way as when Power is OFF with ON/STAND-BY
button of the projector and remote control.
(When the command is sent once, “Power OFF?” message is displayed. If this
command is sent again while “Power OFF?” message is displayed, Power OFF
operation is executed.)
When sending this command during Countdown in process, Countdown is
terminated.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.8 INPUT 1 Command
Command “C05” [CR]
Detail
Select Input 1. This command works differently from the command by “Input 1”
key of the remote control. When Input 1 has been already selected, this
command does not execute the source switching; just for switching to Input 1.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.9 INPUT 2 Command
Command “C06” [CR]
Detail
Select Input 2. This command works differently from the command by “Input 2”
key of the remote control. When Input 2 has been selected, this command does
not execute the source switching; just for switching to Input 2.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English