Sanyo PLC-HP7000L - INPUT 3 S-VIDEO Command; INPUT 3 Y,Pb;Cb,Pr;Cr Command; POINTER RIGHT Command; POINTER LEFT Command

PLC-HP7000L Basic Serial Command Functional Specifications
17/27
6.34 INPUT 3 S-VIDEO Command
Command “C34” [CR]
Detail
Select S-Video input in Input 3.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.35 INPUT 3 Y,Pb/Cb,Pr/Cr Command
Command “C35” [CR]
Detail
Select Y,Pb/Cb,Pr/Cr input in Input 3.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.36 POINTER RIGHT Command
Command “C3A” [CR]
Detail
Move the Pointer of On-Screen Display Menu to the right.
This command works the same way as “>” button of the projector or remote
control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.37 POINTER LEFT Command
Command “C3B” [CR]
Detail
Move the Pointer of On-Screen Display Menu to the left
This command works the same way as “<” button of the projector or remote
control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.38 POINTER UP Command
Command “C3C” [CR]
Detail
Move up the Pointer of On-Screen Display Menu
This command works the same way as “▲” button of the projector or remote
control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.39 POINTER DOWN Command
Command “C3D” [CR]
Detail
Move down the Pointer of On-Screen Display Menu.
This command works the same way as “▼” button of the projector or remote
control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]