Sanyo PLC-HP7000L - LENS SHIFT up Command; LENS SHIFT down Command; LENS SHIFT LEFT Command; LENS SHIFT RIGHT Command

PLC-HP7000L Basic Serial Command Functional Specifications
20/27
Unacceptable “?” [CR]
6.52 LENS SHIFT UP Command
Command “C5D” [CR]
Detail Move projection area upward.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.53 LENS SHIFT DOWN Command
Command “C5E” [CR]
Detail Move projection area downward.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.54 LENS SHIFT LEFT Command
Command “C5F” [CR]
Detail Move projection area leftward.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.55 LENS SHIFT RIGHT Command
Command “C60” [CR]
Detail Move projection area rightward.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.56 AUTO PC ADJ. Command
Command “C89” [CR]
Detail
Execute AUTO PC ADJ. function
This command works the same way as “AUTO PC” button of the remote control.
Sending this command during Auto PC Adj. process terminates the operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.57 PRESENTATION TIMER Command
Command “C8A” [CR]
Detail
Start Timer for presentation
This command works the same way as “P-TIMER” button of the remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]