Sanyo PLC-HP7000L - ENTER Command; FREEZE on Command; FREEZE off Command; ZOOM + Command

PLC-HP7000L Basic Serial Command Functional Specifications
18/27
6.40 ENTER Command
Command “C3F” [CR]
Detail
This command works the same way as “SELECT” button of the projector and
remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.41 FREEZE ON Command
Command “C43” [CR]
Detail
Freeze on-screen image
This command works the same way as “FREEZE” button of the remote control for
Freeze ON, but does not work for Freeze OFF.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.42 FREEZE OFF Command
Command “C44” [CR]
Detail
Cancel Freeze mode
This command works the same way as “FREEZE” button of the remote control for
Freeze Off, but does not work for Freeze ON.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.43 ZOOM + Command
Command “C47” [CR]
Detail
Expand image size
This command works the same way as “ZOOM ▲” button of the remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.44 ZOOM - Command
Command “C46” [CR]
Detail
Reduce image size
This command works the same way as “ZOOM ▼” button of the remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.45 FOCUS + Command
Command “C4B” [CR]
Detail
Adjust on-screen focus by making focal length longer. (The lens moves backward)
This command works the same way as “FOCUS ▲” button of the remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]