Sanyo PLC-HP7000L Specifications

PLC-HP7000L Basic Serial Command Functional Specifications
16/27
6.28 POWER MANAGEMENT CANCEL Command
Command “C2B” [CR]
Detail
Set Power Management function to off status
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.29 POWER MANAGEMENT READY2 Command
Command “C2C” [CR]
Detail
Set Power Management function to ready2 status
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.30 POWER MANAGEMENT SHUTDOWN Command
Command “C2E” [CR]
Detail
Set Power Management function to Shutdown mode.
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.31 D.ZOOM + Command
Command “C30” [CR]
Detail
Enter Digital Zoom mode and expand image size
This command works the same way as “D.ZOOM ▲” button of the remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.32 D.ZOOM - Command
Command “C31” [CR]
Detail
Enter Digital Zoom mode and reduce image size
This command works the same as “D.ZOOM ▼” button of the remote control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.33 INPUT 3 VIDEO Command
Command “C33” [CR]
Detail
Select Video input in Input 3.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English