-14-
1) Remove the Optical Unit/Projection Lens following to the step 8 of
“Mechanical Disassemblies”.
2) Remove 4 screws and remove the Projection Lens.
1. PROJECTION LENS REMOVAL
Remove 2 screws (A) and pull the Integrator Lens-IN Ass’y upward.
2. INTEGRATOR LENS-IN ASS’Y REMOVAL
Fig.2
Fig.1
■ Optical Parts Disassemblies
Remove the Cabinet Top , AV Sub, Main-B/C Board following to the “Mechanical Disassemblies”, before proceed-
ing these disassemblies.
A
A
Integrator Lens-IN
Ass’y
Fig.3
To Next Page
Loading...
