Sanyo PLC-XF60A - Mirror-R Adjustment

- 34 -
x Mirror-R adjustment
1 Move the Mirror-R to overlap the red projected image onto the green
(white) projected image precisely.
1) To adjust the image vertically as shown in Fig.2-1, loosen 2
screws A, and turn the slot-B by using a slot screwdriver.
2) To adjust the image horizontally as shown in Fig.2-2, loosen 2
screws C, and move the slot-D by using a slot screwdriver.
2 Tighten screws A and C to fix the Mirror-R unit.
Red/cyan color offsetRed/cyan color offset
(Target screen image)
Fig.2-1 Fig.2-2
Optical Adjustment
B
A
A
C
C
D