Sanyo PLC-XR201 - XGA LCD Projector

48
Setting
Enter a Logo PIN code
UsethePoint▲▼buttonstoenteranumber.Pressthe
Point◄►buttonstofixthenumberandmovethered
framepointertothenextbox.Thenumberchangesto
.Ifyoufixedanincorrectnumber,usethePoint◄►
buttonstomovethepointertothenumberyouwantto
correct,andthenenterthecorrectnumber.
Repeatthissteptocompleteenteringafour-digit
number.
Afterenteringthefour-digitnumber,movethepointerto
Set. Press the SELECT button so that you can start to
operatetheprojector.
IfyouenteredanincorrectLogoPINcode,Logo PIN
codeandthenumber()willturnredfora
moment.EnterthecorrectLogoPINcodealloveragain.
Logo PIN code change
LogoPINcodecanbechangedtoyourdesiredfour-digit
number.PresstheSELECTbuttontoselectLogo PIN
code change.Logo PIN code dialogboxappears,use
thePoint▲▼buttonstoenterthecorrectcode.TheNew
LogoPINcodeinputdialogboxappears.SetanewLogo
PINcode,confirmationboxappears,chooseYestoset
thenewLogoPINcode.
BesuretonotethenewLogoPINcodeandkeepiton
hand.Ifyoulostthenumber,youcouldnolongerchange
theLogoPINcodesetting.
UsethePoint▲▼buttonstoswitchOnorOff,andthen
presstheSELECTbuttontomakeachioce.
Change the Logo PIN code lock setting
Enter a Logo PIN code
AfteracorrectLogoPINcode
isentered,thefollowingdialog
boxappears.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO. MEMO ON PAGE 75, AND
KEEP IT SECURELY. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED.
Change the Logo PIN code lock setting
Change the Logo PIN code
Next
----
Off
Select