Sanyo PLV-Z3000 Owner's Manual

16
Connecting to a Computer
RGB Scart
Use a Scart-VGA cable (optional).
Video Equipment
COMPUTER
RGB Scart
21-pin Output
Scart-VGA
Cable
Video Equipment
HDMI
HDMI
Cable
HDMI
Use a HDMI cable (optional) for HDMI output.
Connecting to Video Equipment (HDMI, RGB Scart)
HDMI Video
Output
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting the cables.
✔Note:
•Toordertheoptionalcables,seepage58.
COMPUTER
Computer
Monitor Out
Computer (Analog)
Use a VGA cable (commercially available) or a DVI-VGA cable
(commercially available).
DVI-VGA
Cable
VGA
Cable
Installation

Sanyo PLV-Z3000 Specifications

General

Matrix size	0.7 \
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	40 - 300 \
Aspect ratio	16:9
RS-232 ports	1
Dimensions (WxDxH)	400 x 146 x 346 mm
Lamp type	UHP
Lamp power	165 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Focus	Manual
Focal length range	22.3 - 45.3 mm
Noise level	19 dB
Dot clock scanning frequency	100 MHz
Serial interface type	RS-232
Component video (YPbPr/YCbCr) in	3

Weight and Dimensions

Weight	7500 g