EasyManuals Logo

Sanyo PLV-Z3000 Owner's Manual

Sanyo PLV-Z3000
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, or
Japanese.
Setting
Setting Menu
Menu position
Menu position
This function is used to change the position of the On-Screen
Menu. Select Menu position and press the Point
8 or OK buttons.
The Menu position screen appears. Use the Point
ed7 8 buttons
to select the desired position and press the OK button.
Press the Point
ed buttons to select the Setting Menu and
press the Point
8 or OK buttons to access the submenu
items.
Use the Point
ed buttons to select the desired item and
press the Point
8 or OK buttons to access the selected item.
1
2
Choose a language and press
the Point
8 or OK buttons.
The pointer moves to this
icon. Press the Point
8 or OK
buttons again to activate it.
Language
Advanced menu
When this function is On,” the Advanced menu in the Image
Mode Adjustment can be selected. Press the Point
8 or OK
buttons to switch On/Off. See “Advanced menu” on pages 30 - 31
for details.
The Setting Menu allows you to set up other various functions described below.
Language
Press the Point
8 or OK buttons
to display the Language Menu.
Select Menu position
and press the Point
8 or
OK buttons. The Menu
position screen appears.
Use the Point ed or OK buttons to adjust the setting.
3
Setting
Ceiling
When this function is set to On,” the picture is top/bottom and
left/right reversed. This function is used to project the image from
a ceiling-mounted projector. Press the Point
8 or OK buttons to
switch On/Off.
Rear
When this function is set to On,” the picture is left/right reversed.
This function is used to project the image to a rear projection
screen. Press the Point
8 or OK buttons to switch On/Off.

Other manuals for Sanyo PLV-Z3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLV-Z3000 and is the answer not in the manual?

Sanyo PLV-Z3000 Specifications

General IconGeneral
Matrix size0.7 \
Vertical scan range50 - 100 Hz
Horizontal scan range15 - 80 kHz
Projection technologyLCD
Contrast ratio (typical)-
Screen size compatibility40 - 300 \
Aspect ratio16:9
RS-232 ports1
Dimensions (WxDxH)400 x 146 x 346 mm
Lamp typeUHP
Lamp power165 W
Light source typeLamp
Service life of light source2000 h
Service life of light source (economic mode)3000 h
FocusManual
Focal length range22.3 - 45.3 mm
Noise level19 dB
Dot clock scanning frequency100 MHz
Serial interface typeRS-232
Component video (YPbPr/YCbCr) in3
Weight and Dimensions IconWeight and Dimensions
Weight7500 g

Related product manuals