Sanyo PLV-Z3000 Service Manual

- 65 -
No. Adjustment Item Initial Value Range Input source / Description
Group:250 FAN CONTROL
0 Fan Control Mode 1 0 0 - 2 0 : Normal, 1: Ceiling, 2 : Highland
1 Fan Control Mode 2 0 0 - 1 0 : Normal, 1 : Forced Highland Mode
2 Fan SW 0 0 - 3 0 : Auto, 1 : Temp. min, 2 : Tepm. max, 3 : Manual
3 Manual Fan1 Voltage 130 0 - 145
Fan operating voltage at he Manual
4 Manual Fan2 Voltage 130 0 - 145
5 Manual Fan3 Voltage 130 0 - 145
6 Manual Fan4 Voltage 130 0 - 145
7 Manual Fan5 Duty 500 1 - 510 Fan5 Duty value at the Manual
8 Fan1 Min Adjust
✻
22 0 - 255
Fan minimum voltage (3.5V) adjustment
9 Fan2 Min Adjust
✻
22 0 - 255
10 Fan3 Min Adjust
✻
22 0 - 255
11 Fan4 Min Adjust
✻
22 0 - 255
12 Fan1 Max Adjust
✻
232 0 - 255
Fan max voltage (13.8V) adjustment
13 Fan2 Max Adjust
✻
232 0 - 255
14 Fan3 Max Adjust
✻
232 0 - 255
15 Fan4 Max Adjust
✻
232 0 - 255
16 Fan1 Min Limit 43 30 - 145
Min voltage that Fan works
17 Fan2 Min Limit 30 30 - 145
18 Fan3 Min Limit 40 30 - 145
19 Fan4 Min Limit 30 30 - 145
20 Fan5 Min Limit 67 1 - 510 Min duty ratio that Fan5 works
21 Fan1 Max Limit 138 30 - 145
Max voltage that Fan works
22 Fan2 Max Limit 138 30 - 145
23 Fan3 Max Limit 138 30 - 145
24 Fan4 Max Limit 138 30 - 145
25 Fan5 Max Limit 510 1 - 510 Max duty ratio that Fan5 works
26 Fan1 Min Rpm 105 0 - 4500 Fan1 min revolution
27 Fan2 Min Rpm 510 0 - 6510 Fan2 min revolution
28 Fan3 Min Rpm 105 0 - 4500 Fan3 min revolution
29 Fan4 Min Rpm 510 0 - 6510 Fan4 min revolution
30 Fan5 Min Rpm 300 0 - 6510 Fan5 min revolution
31 Fan1 Max Rpm 4500 510 - 4500 Fan1 maximam revolution
32 Fan2 Max Rpm 6510 510 - 6510 Fan2 maximam revolution
33 Fan3 Max Rpm 4500 510 - 4500 Fan3 maximam revolution
34 Fan4 Max Rpm 6510 510 - 6510 Fan4 maximam revolution
35 Fan5 Max Rpm 6510 510 - 6510 Fan5 maximam revolution
Norm/Celing/Highland/Focus
36 Normal Fan1 Min 1380/1380/1545/1545 510 - 4500
Normal_Temp.-Min Fan revolution
37 Normal Fan2 Min 2220/2220/3420/- 510 - 6510
38 Normal Fan3 Min 1905/1905/2100/2100 510 - 4500
39 Normal Fan4 Min 2595/2595/4050/5115 510 - 6510
40 Normal Fan5 Min 1905/1905/2745/3165 510 - 6510
41 Normal Fan1 Max 1470/1470/1710/1710 510 - 4500
Normal_Temp.-Max Fan revolution
42 Normal Fan2 Max 2460/2460/3630/- 510 - 6510
43 Normal Fan3 Max 1905/1905/2100/2100 510 - 4500
44 Normal Fan4 Max 5115/5115/5515/5115 510 - 6510
45 Normal Fan5 Max 3240/3240/3240/3240 510 - 6510
46 Normal TempA Low 28/28/27/- -5 - 100 Normal_Temp. -sensor A_Control_Start-temp.
47 Normal TempA High 36/36/35/- -5 - 100 Normal_Temp. -sensor A_Control_End-temp.
48 Normal TempB Low 49/49/52/- -5 - 100 Normal_Temp. -sensor B_Control_Start-temp.
49 Normal TempB High 54/54/57/- -5 - 100 Normal_Temp. -sensor B_Control_End-temp.
50 Normal TempC Low 49/49/47/- -5 - 100 Normal_Temp. -sensor C_Control_Start-temp.
51 Normal TempC High 54/54/51/- -5 - 100 Normal_Temp. -sensor C_Control_End-temp.
Electrical Adjustments

Sanyo PLV-Z3000 Specifications

General

Matrix size	0.7 \
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	40 - 300 \
Aspect ratio	16:9
RS-232 ports	1
Dimensions (WxDxH)	400 x 146 x 346 mm
Lamp type	UHP
Lamp power	165 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Focus	Manual
Focal length range	22.3 - 45.3 mm
Noise level	19 dB
Dot clock scanning frequency	100 MHz
Serial interface type	RS-232
Component video (YPbPr/YCbCr) in	3

Weight and Dimensions

Weight	7500 g