1
TD831077
I-16
Outline of W-ECO MULTI SYSTEM
4. Example of W-ECO MULTI SYSTEM
1495_T_I
1494_T_I
CENTRAL CTRL
CHECK
SET TEMP.
°C
STANDBY
A
SETTING
TEST
TEST
SET TEMP.
FAN SPEED
MODE
ON - / OFF -
FLAP
A
SENSOR
Name
Simplified Remote Controller
RCS-KR1T
Remote Sensor
ART-K41T
AMY adaptor
SHA-KC3500G
D.D.C.
SHA-KD2000TG
Features
1 This easy-to-operate, multifunction remote controller is ideal for use
in hotels and large facilities not requiring precise temperature control.
2 Basic functions include Start/Stop, Mode selection, Temperature
and Fan Speed/Airflow settings.
3 Automatic Reset function for power failure
4 Group control of up to 8 indoor units with a remote controller is possible.
5 The RCS-KR1T can be mounted on or embedded flush with the wall.
6 The remote controller may also be installed flush with the surface of
a night table. However, in the case the unit’s built-in thermostat will
not function.
7 This controller's also features an alarm, self-diagnosing, remote-
controlled thermostat (for wall-mounted models), and main/ sub
operation.
8 The RCS-KR1T cannot be connected with a Weekly Timer.
1 A remote sensor applicable to air-conditioning units.
2 This sensor can detect room temperatures without the use of a body
sensor (Recommended for air-conditioning systems not equipped
with remote control).
1 Used in combination with 32 × Amy adaptors, Direct Digital Control-
ler can directly connect to BMS for up to Max. 2048 (64 × 32)
indoor units and Max. 960 (30 × 32) outdoor units.
2 The controller makes it possible to use a large-scale intelligent
building control system.
3 Capable of handling input/output operation data for indoor units’
central control, status monitoring, and electricity bill rate for each
tenant.
4 When connecting with BMS, the user should make sure that
computer software is in compliance with the communication
protocol specification of DDC.
1783_M_I
AMY adaptor
Ref. page
III-62~
III-68~
III-70~
To Next Page
Loading...
