Sanyo SPW-CR703GDCH8 - Example of W-ECO MULTI SYSTEM

1
TD831077
I-15
Outline of W-ECO MULTI SYSTEM
4. Example of W-ECO MULTI SYSTEM
4-1. List of controllers
CENTRAL CTRL
SET CL
MODE
FAN SPEED
ON
OFF
•
•
SET TEMP.
UNIT
FLAP
AIR FLOW
SET TEMP.
°C
TIMER SET
SETTING
TEST / CHK
593 _8132
OFF
AIM
739 _8132
ALL
1
SET CL
MODE
FAN SPEED
FLAP
SET TEMP.
SELECT
CENTRAL CTRL
GROUP
ZONE
SET TEMP.
°C
ZONE
1 9
2 10
3 11
4 12
5 13
6 14
7 15
8 16
ON
OFF
•
•
TEST / CHK
ALL / ZONE / GR
CENTRAL
CTRL
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
594 _8132
Features
1 Group (collective) control of maximum up to 8 indoor units with a
remote controller is possible.
2 Control with multiple remote controls (main / sub) is possible.
(Max. 2)
3 Operating state appears on a large crystal display, and service
check functions are also provided.
4 Comes with 72-hour ON / OFF timer.
1 Used in combination with remote controllers, the system controller
can control up to 64 groups of indoor units. (Max. 64 indoor units).
2 Separating the 64 indoor units into 4 zones, each zone can be
controlled individually.
3 Maximum up to 16 groups (indoor units) can be registered to each
zone.
4 Collective control and individual group (unit) control can be per-
formed also.
5 Remote controllerless system is also possible.
6 Up to 2 system controllers (1 main , 1 sub) can be installed in a
system.
7 Alarm and operation output for an external collected signal is
available (potential free contact).
8 Power supply: AC 220 - 240 V.
1 Program covering a week, in which the operation can be stopped
3 times per day, can be set.
* In case of power failure, the timer stores recorded programs for up
to 100 hours.
2 Temporary cancellation with cancel button is also possible.
3 Can be used concurrently with standard remote controller, unit
controller, and system controller.
Name
Remote Controller
RCS-SH80TG
System Controller
SHA-KC64TG
Weekly Timer TM-WBGN
Ref. page
III-6~
III-31~
III-51~