1
TD831077
I-17
Outline of W-ECO MULTI SYSTEM
4. Example of W-ECO MULTI SYSTEM
4-2. Example of control system
Control method
(1) Standard control
(2) Multiple remote control
(3) Group control
Controller
Remote
controller
RCS-SH80TG
Remote
controller
RCS-SH80TG
(Main) × 1
(Sub) × 1
Remote
controller
RCS-SH80TG
(Main) × 1
(Sub) × 1
Contents of control
(1) Standard control
¶ The cooling / heating mode of
outdoor unit is determined by
the first-press priority of
remote controller.
(2) Multiple remote control
¶ Up to 2 remote controller
(1 main , 1 sub) can be
installed for each unit.
¶ Control on a last-signal
priority basis (Latter-press
priority)
(Sets the main / sub of
remote controllers).
¶ Timer setting cannot be done
with sub remote controller.
(3) Group control
¶ Collective remote control of
all air-conditioners
¶ All indoor units operate in the
same mode.
¶ Up to 8 units can be con-
nected.
Control method
(3) Schedule control
(collective schedule control)
Weekly timer
Weekly
timer
Contents of control
¶ Can be used with remote
controller to individually
control up to 64 groups.
¶ Operation with at-hand
remote controller can be
inhibited by making central
control from the manager’s
room.
¶ Up to 2 System Controllers
(main 1, sub 1) can be installed.
¶ The system can be con-
structed without connecting
remote controller.
¶ The airflow direction cannot
be set with system controller,
if a remote controller is
connected.
¶ Connecting a weekly timer to
the remote controller, a
week’s program, turning
ON / OFF 3 times a day, can
be set up.
¶ Can be used concurrently
with system controller also.
Control with system controller
Control with remote controller
Controller
Remote
controller
(RCS-SH80TG)
System
controller
(SHA-KC64TG)
Remote
controller
(RCS-SH80TG)
Weekly timer
TM-WBGN
Control with weekly timer
1758_K_I
(Main) (Sub)
Manager’s room
System
Controller
Outdoor unit
Sub Sub SubMain Main
(1) Standard
control
(2) Multiple
remote control
(3) Group control
1757_K_I
Outdoor unit
Sub Main
(1) Standard
control
(2) Multiple
remote control
(3) Group control
Remote Controller
Sub Main
1011_1143