Sanyo SPW-CR703GDCH8 - How to Use the System Controller

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 32
2. Optional Controller (system controller)
A: ALL / ZONE / GROUP Use this button to select one of the followings:
SELECT button
ALL: Used for turning the all air conditioners on and off.
ZONE: Used for turning the all air conditioners of each zone on and
off individually.
GROUP: Used for turing the (all) air conditioner(s) of each group on and
off individually.
NOTE Max. 4 zones and max. 16 groups (units) in a zone can be
set.
B: ZONE select button Use this button to select zone (1 to 4) to operate individually.
C: GROUP select button j Use this button to select the group (1 to 16) to operate
l individually.
7 How to use the system controller
GR2
UNIT
GR2
UNIT
GR3
UNIT
GR3
UNIT
GR1
UNIT
UNIT
GR1
UNIT
UNIT
UNIT
ZONE1 ZONE2
ALL
796_8132
0198_M_I
ALL
1
SET CL
MODE
FAN SPEED
FLAP
SET TEMP.
SELECT
CENTRAL CTRL
GROUP
ZONE
ZONE
GROUP
23
CENTRAL CONTROL
TEST
AIM
SWEEP
CHECK
SET TEMP.
°C
MODE FIXED
STANDBY
ZONE
1 9
2 10
3 11
4 12
5 13
6 14
7 15
8 16
A
A
ON
OFF
•
•
TEST / CHK
ALL / ZONE / GR
CENTRAL
CTRL
F: MODE button
A: ALL / ZONE
/ GROUP
SELECT button
B: ZONE select
button
C: GROUP select
button
K: CENTRAL
CONTROL button
L: SET button
M: CLEAR button
E: Operation lamp
H: FAN SPEED
button
I: FLAP button
J: TEST RUN / CHECK
button
D: ON/OFF
operation
button
G: Temperature
setting buttons