Control of W-ECO MULTI SYSTEM
3
TD831077
III - 34
2. Optional Controller (system controller)
K: CENTRAL CONTROL button Use this button to inhibit individual operation by remote controller for
central control as follows:
CENTRAL CTRL
1 : Inhibiting individual ON / OFF operation
2 : Inhibiting individual ON / OFF, MODE and SET TEMP operation.
3 : Inhibiting individual MODE and SET TEMP operation.
No indication : Central control is cleared.
(Individual operation)
L: SET button This button is used only when installing the air conditioner.
NOTE Do not use the SET button for normal operation.
M:
CLEAR button Use this button to reset the filter sign (timer).
The air conditioner has the timer for filter and informs you the time of
cleaning the filter.
To Next Page
Loading...
