Sapido SH106+ - Light Sensor

Sapido Technology Inc. www.sapido.com.tw
75
5.3 Light Sensor
Step1. Click <Sensor>
Step2. Click <Light Sensor>
Step3. The page of Light
Sensor will show the current
in room brightness.
Step4. Click the <Siren
Device>
Step5. Select the
“Notification Message” and
“Sensor Alarm” options, you
will receive a push
notification on your phone
and the alarm will make
beeping sound when the
temperature is in an
abnormal situation.
Step 6. For setting up the
condition of the alarm trigger,
please click Sirens Device
(shown below in red frame).