Sartorius arium 611VF - System Settings and Configuration; Setting Date and Time; Measurement Units Selection

To Next Page

To Previous Page

System Settings

Prior to initial operation of the

arium 611VF, set date and time,

the language for the display text

and the desired measurement units.

To set these functions:

Setting the Date and Time

• The main power switch on the left

hand side of the housing must be

on (“I”).

The arium 611VF will then perform

the system check. The display will

show the following information:

The display will show the following

when the system check is complete

• Press Menu to get in to the Main

• Select “Setup”. Press ENTER to

confirm.

• Select “Time & Date”. Press ENTER

to confirm.

Display will show the following:

TIME/DATE Standard

U.S.

SETUP Time & Date

Set Point

Meas. Units

MENU Utilities

Maintenance

Setup

MENUOMain Menu

OPEROOperation

ENTRONew Cart. Flush

Sartorius System VF

S/N XXXXXXXX

System Check OK

V1.XX

– When “Standard” is selected,

the date will be displayed in the

DD.MM.YY format and time in

the 24-hour format.

– When “U.S.” is selected, the date

will be displayed in the MM.DD.YY

format and the time in the 12-hour

format.

• Choose a format and press ENTER

to confirm.

• Select Time & Date and use the

arrow keys Y or y to change

current Time & Date settings.

Press ENTER after each digit is set

to move to the next digit.

• Press ENTER to confirm the

Time & Date setting.

The system will then switch to the

previous Operation Mode.

Measurement Units

This feature allows the user to

select how measurement units

are displayed. The user can choose

between MO+cm, µS/cm, with

the option to display readings

compensated to 25°C or uncom-

pensated, or temperature. To set

the measurement units:

• Press MENU to get into the Main

Menu:

• Select “Setup”. Press ENTER to

confirm.

• Select “Measurement Units”.

Press ENTER to confirm.

The display will show the following:

Use the arrow keys Y or y to

select the desired option and press

ENTER to confirm.

Note

In some menus not all menu

items are visible on the display.

Repeatedly press the arrow

key y to display menu items

listed further below.

The system will then switch to the

previous Operation Mode.

MEAS. MO * cm comp.

µS/cm comp.

O * cm uncomp.