EasyManua.ls Logo

Sartorius arium 611VF - Specifications

Sartorius arium 611VF
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Specifications
Dimensions W + D + H 43.2 + 48.3 + 34.3 [cm]
Empty weight 15.9 kg
Operating weight 23.6 kg
Clearance requirements Sides: 10 cm minimum for cable and tubing connections
Front: 40 cm minimum for opening the doors
Inlet water requirements arium 611VF requires water pretreated by:
- distillation
- deionization or
- reverse osmosis
Distilled water: > 250 KO · cm (< 4 µS/cm)
RO water: TDS < 25 ppm CaCO
3
> 20 KO · cm (< 50 µS/cm)
Deionized water: TDS < 10 ppm CaCO
3
> 50 KO · cm (<20 µS/cm),
All: Turbidity < 1 N.T.U.
Silica < 1000 ppb
TOC < 1000 ppb
Pressure: From atmospheric tank inlet to a maximum inlet pressure of 7 bar
Product water capabilities Quality of the
purified water: 18.2 MO + cm at 25°C
RNase-/DNase-/DNA-free
Bacteria: < 1 CFU/100 ml
TOC: < 1 ppb
Endotoxin: < 0,001 EU/ml
Flow rate Up to 1.5 l/min maximum at minimum inlet feed water pressure of 2.0 bar at 50 HZ and
with a new final filter.
Environmental conditions Operating: 5°C - 28°C; 80% relative humidity, non-condensing
Storage: 5°C - 45°C; 80% relative humidity, non condensing
Electrical requirements 100-240 V~, 50/60 Hz, 1 phase
Fuses power entry 2 fuses 5 + 20 mm, time lag, 250 V, 1 A
Installation Category II (over-voltage) in accordance with IEC 664,
Pollution Degree 2 in accordance with IEC 664.
Altitude limit: 5,000 meters.
Complies with the EMV: EN 50081-1, EN 50082-1
following standards Safety: IEC 1010-1-92

Related product manuals