Error Codes
If a key is pressed that has no function
or is blocked, the error is indicated
as follows:
– a double-beep is sounded as
an acoustic signal if the key has no
function
– an error message indicates invalid input
– an error code or error message indicates
incorrect operation
The response to operator errors is
identical for all operating modes.
See the chapter entitled “Error Codes”
for a detailed explanation of error
messages.
Saving Data
Storing Parameter Settings
The most recent Setup menu parameter
and drying program settings are active
when you switch on the moisture ana-
lyzer. Factory settings may be restored
at any time.
Storing Settings
Access to the following can be
password-protected:
– user-defined drying programs
– the device parameter menu
– isoTEST functions
If no password is assigned, all users can
access the SETUP device parameters and
drying program settings without
entering a password.
If you assign a password and then
forget what the word is, you can use
the General Password (see Appendix)
to access these menus.
12
To Next Page
Loading...
Need help?
General
