Example: Standard Drying with Fully Automatic Shutoff Mode
The moisture content of 2 g of corn starch is to be analyzed. The sample can scorch if overheated but is not particularly heat sensitive.
The analysis is to be ended automatically as soon as a constant weight is reached.
Settings (changes in the factory settings):
Program number: 1
Final temperature: 130 °C
Start of analysis: With stability after Enter key is pressed
End of analysis: Fully automatic (factory setting)
Part A: Configuring drying parameters
Step Key (or instruction) Display/Printout
1. Turn on the moisture analyzer e Sartorius logo is displayed
Self-test runs
2. Select
PROGRAM function y or x
3. Confirm the
PROGRAM function u
4. Select
P1 program u y
5. Select
Heating program u
6. Select
Standard drying u
7. Enter a temperature value of
130 u
3 + x
u
5 + y
u
27
PROGRAM
P1 105
o
C Auto.
S
0092
g
TARESETUP
To Next Page
Loading...
