Safety Inspection
  If there is any indication that safe  
operation of the moisture analyzer can 
no longer be guaranteed:
§  Isolate from supply voltage:
Unplug power cord. 
>  Lock the equipment in a secure place
  Safe operation of the moisture analyzer 
can no longer be guaranteed if:
–  There is visible damage to the moisture 
analyzer or power cord
–  The moisture analyzer no longer  
functions properly
–  The moisture analyzer has been  
stored for a relatively long period under 
unfavorable conditions
– 
The moisture analyzer has been subjected
 
to rough handling during shipment
  In this case notify your nearest  
Sartorius Service Center.  
Maintenance and repair work may be 
carried out only by service technicians
–  who have access to the required  
maintenance manuals
–  who have attended appropriate  
service training courses
  We recommend that the moisture  
analyzer be inspected by a qualified 
Sartorius service technician to check  
the following specifications:
–  Resistance of the protective grounding 
conductor < 0.2 Ohm as measured with 
a commercially available multimeter
–  Insulation resistance > 2 MOhm as 
measured with a constant voltage of at 
least 500 volts at a 500 kOhm load
  The duration and number of measure-
ments should be determined by  
a qualified Sartorius service technician 
based on the particular ambient  
and operating conditions at the place  
of use (once a year as a minimum).
49
Recycling
Information and Instructions on  
Disposal and Repairs 
Packaging that is no longer required must 
be disposed of at the local waste disposal 
facility. The packaging is made of environ-
mentally friendly materials that can be 
used as secondary raw materials.
The equipment, including accessories and 
batteries, does not belong in your regular 
household waste. The European legislation 
requires that electrical and electronic 
equipment be collected and disposed of 
separately from other communal waste 
with the aim of recycling it. 
In Germany and many other countries,  
Sartorius takes care of the return and  
legally compliant disposal of its electrical 
and electronic equipment on its own. 
These products may not be placed with the 
household waste or brought to collection 
centers run by local public disposal  
operations – not even by small commercial 
operators. 
For disposal in Germany and in the  
other member nations of the European 
Economic Area (EEA), please contact  
our Service technicians on location or our 
Service Center in Goettingen, Germany:
Sartorius
Service Center
Weender Landstrasse 94–108
37075 Goettingen, Germany
In countries that are not members  
of the European Economic Area (EEA) or 
where no Sartorius subsidiaries or dealer-
ships are located, please contact your  
local authorities or a commercial disposal 
operator.
Prior to disposal and/or scrapping  
of the equipment, any batteries should  
be removed and disposed of in local  
collection boxes.
Sartorius will not take back equipment 
contaminated with hazardous materials 
(ABC contamination) – either for repair or 
disposal. Please refer to the accompanying 
leaflet/manual or visit our Internet website 
(www.sartorius.com) for comprehensive 
information that includes our service 
addresses to contact if you plan to send 
your equipment in for repairs or proper 
disposal.