Factory
setting
Factory
setting
Device Parameters (Overview)
ο Factory settings
√ User-defined setting
Setup – Password blank Enter max. 8 characters
Device
parameters User ID blank Enter max. 20 characters
Interface ο SBI Baud rate 150 baud
300 baud
ο 1200 baud
2400 baud
4800 baud
9600 baud
19200 baud
Number of data bits ο 7 (not if parity=“none")
8
Parity none (only with 8 data bits)
ο Odd
Even
Number of stop bits ο 1
2
Handshake mode Software handshake
ο Hardware handshake
xBPI Network address: ο Enter any number from 0 to 31
Drying report Only results
ο With GLP/drying parameters
As per configuration (each field is selectable) GLP head
Program identifier
Clock Time of day Header line 1
Date Header line 2
Heating parameter
Display contrast 0 Start criteria
1 Shutoff parameter
ο 2 Start weight
3 Intermediate results
4 End weight
End result
Acoustic signal ο On Name field
Off
External switch ο Print key
Enter key
CF key
Barcode scanner/additional keypad
Factory settings No
Yes
17
To Next Page
Loading...
