Female interface connector:
25-pin D-Submini (DB25S) with
screwed fastening
Male Connector Used
(please use connectors with the same
specifications)
25-pin D-Submini (DB25S) with
shielded cable clamp assembly
(Amp type 826 985-1C) and fastening
screws (Amp type 164 868-1)
Pin assignment:
Pin 1: Signal ground
Pin 2: Data output (T+D)
Pin 3: Data input (R+D)
Pin 4: Signal return (T+D/R+D)
Pin 5: Clear to send (CTS)
Pin 6: Internally connected
Pin 7: Internal ground
Pin 8: Internal ground
Pin 9: Reset _ In*)
Pin 10: –12 V
Pin 11: +12 V
Pin 12: Reset _ Out*)
Pin 13: +5 V
Pin 14: Internal ground
Pin 15: Digital input or barcode
scanner/additional keypad
Pin 16: Digital output
Pin 17: Digital output
Pin 18: Digital output
Pin 19: Digital output or barcode
scanner/additional keypad
Pin 20: Data terminal ready (DTR)
Pin 21: Supply voltage ground “COM”
Pin 22: –
Pin 23: –
Pin 24: +10 V
Pin 25: +5 V
*) = Hardware restart
44
Pin Assignment Chart
To Next Page
Loading...
