Service
Regular servicing by a Sartorius
technician will extend the service life
of your moisture analyzer and ensure
its continued weighing accuracy.
Sartorius can offer you service contracts
with your choice of regular maintenance
intervals ranging from 1 month to
2 years.
Maintenance intervals depend on
operating conditions and individual
tolerance requirements.
Repairs
Repair work must only be carried out
by trained service technicians.
Any attempt by unqualified personnel
to carry out repair work may result
in hazards for users.
Cleaning
Depending on the type of sample,
cooling vapors may condense on the
cover and result in discoloring of
the cover. This is not detrimental to
the operation of the device.
! Make sure that no dust or liquid pene-
trates the moisture analyzer housing
! Do not use any aggressive cleaning
agents (solvents, abrasive cleaning
agents, etc.); clean the moisture
analyzer with a cloth moistened with
a mild detergent (soap) only
§ Isolate from supply voltage: Unplug
the power cord from the wall outlet
(mains supply). Unplug any connected
data cables from the analyzer
$ The pan draft shield and the pan
support can be removed for cleaning
§ Carefully remove any sample residue/
spilled powder using a brush
or hand-held vacuum cleaner
§ Wipe down analyzer with a soft,
dry cloth after cleaning
Cleaning the Heating Unit and
Temperature Sensor
§ Open the hood
! Danger: The terminals of the heating
unit are under live current
§ Isolate from Supply Voltage:
Unplug Power Cord.
Disconnect data cables from
moisture analyzer
§ Carefully remove any residues from
the temperature sensor
§ Use a soft-bristled brush or a commer-
cially available cleaning agent for
glassware to clean the ceramic heating
element.
§ Use a commercially available glass
cleaner to clean the protective glass
on the quartz-rod radiator.
48
Care and Maintenance
To Next Page
Loading...
