Specifications
Dryer functions:
Model MA150C MA150Q
Heating element Ceramic IR heater Quartz-rod IR heater
Temperature range 40 to 180 °C 40 to 220 °C
Temperature increments Adjustable in 1 °C increments
Temperature adjustment With YTM03MA/YTM05MA temperature adjustment set
Weighing functions:
Weighing capacity 150 g
Readability 1 mg, 0.01% moisture content
Repeatability, typical (%) Sample weight 1 to 5 g: 0.2%
Sample weight 5 g and over: 0.05%
External calibration weight 100 g (E2)
(with an accuracy of at least…)
Sample pan dimensions d 90 mm
Drying parameters:
Heating programs Standard; gentle drying
Drying time 0.1 to 99.9 minutes
Number of stored programs 20
Shutoff criteria Fully-automatic, semi-automatic (absolute, percentage),
timer mode (1 + 99.9 min.), manual
Display of analysis results Moisture, dry weight, ratio, weight loss, residue (g or g/kg), g/l
(with specification of sample quantity)
Minimum sample weight 0.100 g
Analyzer (hardware):
Dimensions (W + D + H) 213 + 320 + 181 mm
Net weight, approx. 5.1 kg
Voltage 230 V or 115 V (depending on model variant), –15% to +10%
Frequency 48 – 60 Hz
Fuses 2 (neutral conductor/phase), 6.3 AT, 5 + 20 mm (internal)
Operating temperature range +10 … +30 °C
Power consumption 700 VA max.
Built-in interface RS-232C
Format: 7 bit ASCII, 1 start bit, 1 or 2 stop bits
Parity: odd or even
Transmission rates: 150 to 19,200 baud
Handshake: Software or hardware
Digital input: 1, configurable function
Digital outputs: 4, moisture analysis status
50
Overview
To Next Page
Loading...
