Moisture Analysis
Switch analyzer on: e key
Select drying program:
Select PROGRAM:
y and u keys
Use the y and u keys to select a program
(designated P1 through P20)
Cancel password prompt, if necessary: c key
Exit program selection: c key twice
Open sample chamber:
Position sample pan:
Tare sample pan: TARE function and u key
Add sample:
Close sample chamber:
Start analysis: START function and u key
or directly after closing sample chamber
Drying in progress: wait
Read off result:
1890
PROGRAMM
P1 130
o
C Auto. 128
o
C 5.2min
S
%L
NEXTSETUP
To Next Page
Loading...
