Operating the Moisture Analyzer
Entering Numbers on the Number Pad
You can enter numeric values in the method parameters or system settings (such
as the temperature setting for a heating program). A number pad appears on the
display, which is always used in the same way.
t To enter numbers, select the desired numbers one after the other.
y The entered numbers appear at the top of the display.
t To correct the last entered number, select p.
y The number is deleted. Then enter the correct number.
t To clear the entire entered value, select C.
t To confirm the entry, select l.
Entering Text and Characters
A keyboard will appear when you have to enter text and characters.
t Select the individual characters one after the other. The entered text appears
at the top of the display. If you hold down a character for longer, the special
versions of that character (umlauts, accent marks) and special characters appear.
t Use the Shift key to switch the keyboard display between uppercase and
lowercase letters.
t Use the 123 key to switch the keyboard display from letters to numbers (incl.
special characters).
t Use the ABC key to switch the keyboard display from numbers to letters.
t Use the back arrow key to delete the last character.
t The
l key ends the process and saves character input.
°C
Temperature
123
456
789
0
C
105
qwer tzuiop
asdfgh
To Next Page
Loading...
