Sartorius MA37 - Communication with Peripheral Devices; Direct Transfer of Data (PC)

48
USB Interface
Operating Instructions Moisture Analyzer MA37
USB Interface
Communication with Peripheral Devices
Purpose: The interface is used to exchange data with connected peripheral devices: Measured
values and parameters are sent to a printer or PC. Control commands and data
inputs can also be sent to the analyzer from connected devices such as a PC.
The USB interface can be used to transmit data via the SBI protocol.
The following connections to peripheral devices are possible:
Mini-B
PC-SBI
PC spreadsheet format
PC text format
Off
Printer YDP20-0CE
USB-RS 232 SBI
Off
Printer YDP30,
YDP40
Off
Type-A
Mini-A Type-B
Mini-A
RS 232
9-pin
Sartorius order no.:
YCC04-D09
Sartorius order no.:
YCC03-D09
USB Host
(Master)
1)
2)
3)
USB Device
(Slave)
Serial device
with 9-pin
SUB-D plug
Printer equipment
supplied
Direct Transfer of Data (PC)
Requirements:
– PC with Windows 7, Windows 8, Vista, Windows XP, or 2000 operating system
– A to Mini-B USB connection cable from PC to moisture analyzer, Sartorius
order no.: YCC04-D09
– PC with internet connection
The USB driver for the virtual interface is listed with Microsoft
®
and is available
online via the Microsoft
®
update service.
PC without internet connection: To load the USB driver, please contact your local
Sartorius Service Center.
1)
Mini-B
PC-SBI
PC spreadsheet format
PC text format
Off
Type-A
Sartorius order no.:
YCC04-D09
USB Host
(Master)