Sartorius MA37 - List of Available Settings

27
System Settings (Setup Menu)
Operating Instructions Moisture Analyzer MA37
List of Available Settings
This section contains information about all of the basic settings on the moisture
analyzer, which can be defined in the Settings menu.
Language
Language
Deutsch
Français
English
Español
The language of the display text can be set here. English is set as the default
language on the moisture analyzer (see “Setting the Language” on page 21).
The following languages are available:
– English
– German
– French
– Spanish
– Italian
– Japanese
– Russian
– Chinese
– Polish
– Portuguese
– Turkish
Date and Time
Date and time
Date
Date format
Time
Time format
The date, time, and display format can be set here.
Under Date:
t To set the date, select t, enter the current date and confirm with l.
Under Date format:
t Select how the date is displayed and printed out.
– DD-MMM-YYYY:
The date is displayed in the order of day, month, then year.
– MMM-DD-YYYY:
The date is displayed in the order of month, day, then year.
– YYYY-MM-DD (ISO):
The date is displayed in the order of year, month, then day.
(The time is always displayed in 24-hour format with this setting.)
Under Time:
t To set the time, select t, enter the current time and confirm with l.
Under Time format:
t Select how the time is displayed and printed out.
– 24h:
The time is displayed in 24-hour format. (This is the only available setting
when the date is set to ISO format.)
– 12h (AM/PM)
The time is displayed in 12-hour format. The hours before noon are
displayed with AM and the hours after noon are displayed with PM.