Sartorius MA37 - Opening the Menu and Changing the Settings

26
System Settings (Setup Menu)
Operating Instructions Moisture Analyzer MA37
System Settings (Setup Menu)
The Settings (Setup) menu contains all basic settings for the moisture analyzer.
Opening the Menu and Changing the Settings
t Select the menu key on the main screen.
Moisture in %M
Standard drying 105 °C
Standby temperature -
Initial weight -
End Fully automatic
Target value -
No automatic printout
y The menu is displayed.
t Select the i (Setup) key in the menu.
Settings
Language
Date and time
Device information
Calibration/Adjustment
Printout
y The Settings menu appears.
Settings
Signals
Date
and
time
Device information
Calibration/Adjustment
Printout
t To scroll, place your finger on the display and drag it slowly either up or down.
y The entries on the display move in the corresponding direction. While you are
scrolling, a gray scroll bar appears on the right of the display, indicating where
you are in the list of options.
t Select a setting and make the desired change. Information about the available
settings can be found from page 27.
t Select l to confirm your changes.
t Select ; to return to the menu. The changed settings are active when you reach
the first level of the menu again.