Sartorius SIWABBP User Manual

Signum 1-2-3
Settings
Settings
16
Settings
You can configure the Signum by
selecting parameters in the Setup menu.
These are divided into the following
groups (menu level 1):
– Application parameters
– Fn key function
– Device parameters
– Device-specific information
“Info"
– Language
When used in legal metrology, not all
parameters can be accessed.
Factory-set parameters are identified by
an “*” in the list starting on page 19.
You can choose from five languages for
the display of information:
– German
– English (factory setting)
– English with U.S. date/time
– French
– Italian
– Spanish
Printing parameter settings:
§ Press the p key in Setup
Scope of printout:
Depends on the position in Setup
Setting the Language
Example: Selecting “US Mode" for the language
e
Turn on the device
) While all segments are lit, press the
) key
The first item in the Main menu is shown:
APPL
k Switch to the LANG menu item (press
k repeatedly until LANG is shown)
) Select LANG to open the submenu for
setting the language
The currently active language is shown
k
Switch to the US MODE menu item (press
k repeatedly until US MODE is displayed)
) Save the menu item
( Exit this menu level and configure other
settings as desired, or
) (press and hold) Exit the menu

Sartorius SIWABBP Specifications

General

Brand	Sartorius
Model	SIWABBP
Category	Scales
Language	English