Sartorius SIWABBP - Automatic Data Output (Sbi)

90
Automatic Data Output (SBI)
You can have the weight readout printed automatically
1
).
This printout can be generated after a certain number of display
updates
2
). You can also configure whether or not the auto-print
function is dependent on the stability of the scale
3
). The display
update frequency depends on both the scale model and the
operating status.
Examples:
N + 153.00 g Net weight
Stat Display blank
Stat L Display underload
Stat H Display overload
“Data output” setting:
1
)
3
) “Automatic, without stability”
or
“Automatic with stability.”
Factory setting: Manual after stability;
i.e., automatic data output function off.
2
) Time-dependent automatic data output:
Interval: 1, 2, 10 or 100 display updates
Factory setting: 1 display update
Signum
®
2 and 3 only
External Keyboard Functions (PC Keyboard)
Configuration
setup: barcode: ext.keyb
The alphanumeric key codes implemented here are specific
to the German keyboard layout. The following alphanumeric
characters are used (some require “Shift” key):
a - z, A - Z, 0 - 9, space, „,.\+’<>/“$@%/();=:_?*
Function keys:
PC keyboard Signum
®
2 and 3
F1 ) key
F2 ( key
F3 n key
F9 D key
F10 Press and hold D: Info function
F11 M key
F12 k key
Print p key
POS 1 c key
Backspace c key
ESC c key
Data Interface
Data Interface